To ensure optimal cleanliness, disinfection, and comfort, follow these simple steps:

1) Wash your hands: Before handling your glasses, wash and dry your hands thoroughly with soap and water to avoid contamination.
2) Cleaning the lens: Remove a lens from your eye and place it in the palm of your clean hand. Add 3 drops of Care+ all-in-one solution and gently rub the lens on both sides for at least 10 seconds to remove deposits.
3) Rinsing: Rinse the lens thoroughly with a steady stream of Care+ solution to remove any loose residue.
4) Storage and disinfection: Place the rinsed lens in the corresponding compartment of the clean lens case. Fill the case with fresh Care+ solution until the lens is completely covered.
5) Repeat: Perform steps 2 to 4 with the other lens.
6) Overnight disinfection: Leave the lenses submerged in the solution for a minimum of 6 hours or overnight for complete disinfection.
7) Daily use: Before reinserting your lenses, you can rinse them briefly with a drop of Care+ if desired. Always discard the used solution from the case and use fresh solution each day. Never reuse the previous solution.
8) Case replacement: It is recommended to replace the lens case regularly (every 1-3 months) to maintain hygiene.

Sterile, aqueous, isotonic solution containing sodium chloride (0.84% ​​w/v), potassium chloride (0.142% w/v), disodium edetate (0.025% w/v), polyhexine (0.0002% w/v), poloxamer (0.103% w/v), hypromellose (HPMC) (0.152% w/v), sodium hyaluronate (0.01% w/v), and sodium phosphate buffer