Description

The Yoomi warmer is a product that allows you to quickly heat baby milk to the temperature of breast milk.

Product purpose

The product is intended for use with Yoomi bottles to warm baby milk, both breast milk and formula.

Product characteristics

The Yoomi warmer features a system of heating channels through which milk flows, warming within one minute to 32-34°C (90-93°F), which is similar to breast milk and preserves all the nutrients in the milk. When ready, the warmer will rattle when shaken, and will make a splashing sound when used. The product can be recharged by boiling water or heating in a Yoomi capsule in the microwave. A single warmer can be recharged up to 300 times.

Product use

Heating milk:
1. Place the collar over the bottle nipple until you hear a gentle click.
2. Place the warmer in the collar and screw on the food bottle.
3. Press the orange button firmly, after a few seconds you will feel warmth.
4. After 30 seconds, put the cap on the bottle and turn it upside down.
5. After another 30 seconds, begin feeding.

Charging the heater in boiling water:
1. Boil water in a pot, place the heater in the boiling water so that it is on its side and completely immersed in the water.
2. Cook the device for 30 minutes.
3. Remove and let the warmer cool (75 minutes at room temperature or 20 minutes in cold water).

Charging the warmer in the microwave (in the Yooimi capsule):
1. Place the heater upside down in the capsule and close it carefully.
2. Place the product in the central part of the microwave and heat for 70 seconds (700-750 W power) or 80 seconds (800-1200 W power).
3. Remove the capsule and shake it for 30 seconds.
4. Heat the product for another 30 seconds, then shake it for 10 seconds.
5. Before opening the capsule, wait at least 5 minutes, the heater will be ready for use after it has cooled down completely (75 minutes at room temperature or 20 minutes in cold water).

If you don't know your oven's wattage, heat the product for 70 or 80 seconds (depending on whether you can hear the heater rattling or not), then shake the entire container 5 times. Heat it again for 30 seconds and shake for another 10 seconds. Let it cool.

Sterilization:
1. Place the charged warmer in the sterilizer, add 4 times more water than recommended, then turn on the device for 30 minutes.
2. Remove and let the warmer cool.

Notes and precautions

Before first and each subsequent use, the warmer must be sterilized.
Immediately after charging, the warmer's button will turn blue, indicating it is not yet ready for use. Once it cools down, the button will turn orange again.
Once charging is complete, wait at least 5 minutes before opening the capsule.
If the heater overheats, a red stripe of 2 mm or more will be visible, in which case the latches will block the opening of the capsule until the heater cools down.
If a blue liquid appears in the capsule after heating, wait for it to cool completely before touching it. The liquid is a mixture of salt and vinegar and is therefore non-toxic, but it may be hot.
Do not microwave more than one capsule at a time.
After each charge, wash the capsule with cold water and then dry it.