Description
Aerosol with piston - puppy, with adjustable speed PM19, Perfect Medical
Your nebulizer is intended for use in the treatment of asthma, COPD, and other respiratory conditions where an aerosolized medication is required during therapy.
Specifications:
Power: 220V/50Hz
Current: 0.6A
Medication capacity: 10 ml
Particle size: 0.5-10 um
Sound level: ≤65 dBA
Average nebulization rate: ≥0.25 ml/min
Compressor pressure range: 22-58 PSI
Flow range (in liters): 6.7 Ipm
Operating temperature range: 10°C-40°C
Humidity range: 10-95% RH
Storage temperature range: -20°C-70°C
Dimensions: 185x169x107 mm
Weight: 1.2 kg
Standard accessories: adjustable speed nebulizer, air tube, cap, adult mask, child mask, filters (5)
Properties:
A way in which we can intervene in the treatment of respiratory tract infections.
Way of ussage:
Note : Before the initial operation, the nebulizer must be cleaned very well.
1. Place the compressor nebulizer on a straight and stable surface.
Make sure you have easy control over it from a sitting position.
2. Important: Before the initial operation, the nebulizer must be cleaned
according to the instructions in the "Cleaning procedure" chapter of this manual.
3. Gently turn the top of the nebulizer clockwise to a
disassemble the nebulizer.
4. Fill the medical cup with the medicine prescribed by the doctor. Take care of his cone
be placed inside the lower part.
5. Gently rotate the top counterclockwise to reassemble
nebulizer. Make sure that the 2 sections are fixed well.
6. Attach one end of the air tube to the base of the nebulizer.
7. Attach the other end of the air tube to the connector tube located on the side
of the compressor.
8. Attach the top section of the nebulizer.
9. Connect the cable to the power outlet. At this moment the button must be in
"Off" position.
10. Press the start button to start the treatment.
11. To adjust the nebulization speed, turn the knob on the top of the
cup of medicine.
Important:
The compressor motor has a thermal protector that automatically stops the unit
to avoid overheating. When this happens, please:
a. Turn off the device
b. Disconnect from the power outlet
c. Wait 30 minutes until the engine cools down before a
do other treatment.
Make sure that the air sources are not obstructed.
11. When you have completed the treatment, turn off the unit and unplug it.
Warnings:
Precautions for the device:
1. To avoid an electric shock: Keep the device away from water; Not
insert the power cable or the device into the liquid; Do not use it while doing
bathroom; Do not try to touch the device if it has reached the water - remove it
immediately from the socket.
2. Stop using the device if it has any defective parts (including the cable
current), if it got into the water. Immediately send the device to an authorized service center
for examination and repair.
3. The device must not be used in the presence of flammable gas, oxygen or spray
aerosol.
4. Disconnect the device from the power source before cleaning the device
before filling and after each use.
5. Do not use accessories other than those recommended by the manufacturer.
Operation Precautions:
1. Connect the device to the correct voltage for this model.
2. Do not leave the device running unattended.
3. Do not operate the device if it has a defective cable or if it has fallen into water
if it doesn't work normally. Return it to a service center for repair.
4. If an abnormality occurs, immediately turn off the device and do not use it until further notice
it was examined and repaired.
5. Always unplug the device immediately after use.
6. Do not block the air sources of the central unit and do not place it in a place where
airways may be obstructed.
Storage precautions
1. Do not store the unit under direct sunlight, high temperatures
or humidity.
2. Keep the unit away from small children.
3. Always unplug the device if you are not using it.
Cleaning precautions
1. Do not put the unit in water. It can malfunction.
2. Disconnect the device from the socket before cleaning.
3. Clean all parts after each use as indicated in this manual.
Features
Product code | 1403 |
Category | Nebulizers, Medical equipment |
Brand | Perfect Medical |
Delivery from | Romania |
Reviews
There are no reviews for this product.