PM-41 Mouthshower, Perfect Medical

Properties:
Product model: PM-41(L-15)
Rated power: 5W
Nominal voltage: 5 V
Charging time: 4-5 H
Water resistant grade: IPX7
Battery capacity: 2000 mAh
Water tank capacity: 300 ml
Rated water pressure: 40-140 psi
Gear adjustment: 5 cleaning modes
Product size: 238 x 100 x 69mm
Pulse frequency: 1600 - 1800 / minute

How to use:
1. Check to make sure the product and your hands are dry, then connect the USB plug to the 5V adapter (the adapter is prepared by the user) and plug it into the outlet (Figure 1).
2. Remove the charging cover, insert the other end of the USB cable into the charging jack of the punch, please pay attention to the charging jack and make sure it is inserted in the correct position (Figure

If the power quantity symbol is empty during or after use, it means that the power quantity is insufficient and needs to be charged. It takes 4-5 hours to fully charge.
When charging, the electrical quantity symbol indicates the electrical quantity.
The power symbol is full and no longer flashing, it means it is fully charged.
When using, please follow the steps below:
1. Insert the nozzle into the hole at the top of the handle (Figure 3-1). If you need to replace the nozzle, first stop and then gently press the nozzle release button to easily replace the nozzle (Figure 3-2).
2. Fill the water tank with water. There are two methods of filling with water as follows:
a. Open the water tank cover, hold the mouthwash horizontally, put water in the water tank, and then close the cover. (Figure 4).
b. Pull down the water container, take the water tank, hold the water tank vertically, inject water into the water tank and push up during installation (Figure 5).
3. Select the desired mode by pressing the mode button. You can also switch to the desired mode by pressing the mode button during use.
This product has five modes: dynamic, normal, smooth, burst fire and manual mode. The specific functions are as follows:
Dynamic mode: In the first 3 seconds, it changes from weak to strong with strong force, which is not suitable for beginners;
Normal mode: In the first 3 seconds, it changes from weak to strong, and the standard water pressure meets the daily cleaning requirements;
Smooth mode: light water pressure, suitable for people with sensitive teeth;
Burst wire mode: point-to-point injection, especially for orthodontic users;
Manual mode: According to personal conditions, it is suitable for people with special needs.

Tips:
Dental experts recommend that the first user use the smooth mode for 1 week, and then use other modes after adaptation.
4. Before use, you need to hold the mouthwash vertically, the nozzle extends into the cavity, aligns the teeth or gums, and the mouth is slightly opened, so that the water can flow smoothly (Figure 6-1 & 2).
5. Press the switch button to use. When using, please pay attention to the following points: (Figure 7)
a. The direction of the water flow is perpendicular to the teeth or gums;
b. Move slowly along the teeth and clean the teeth in order;
c. The nozzle is aligned with the gum line and perpendicular to the gum.

Do not spray water directly along the periodontal pocket. After use, press the switch button to turn off. This product has a 2-minute timer function. It will automatically turn off after 2 minutes. If you need to continue using it, please press the switch button.

After use, follow the steps below:
1. Open the water tank cover and pour the water (Figure 8).
2. Press the switch button to brush the teeth and empty the accumulated water automatically (Figure 9).
3. Press the switch button to turn off the oral irrigator and then close the water tank cover.
4. Dry the mouthwash with a cloth (Figure 10).

To avoid the spread of bacteria, please ensure that there is no residual water in the oral shower. If you do not intend to use it for a long time, please clean the product and keep it after drying.