Diafine
31G x 5mm lancing needle

Description
Sterile, double-ended, single-use medical device designed for use with a needle injection system (e.g., pen injector) that meets the specifications of EN ISO 11608-1 for subcutaneous insulin injection. Insulin pen needles are used by consumers, caregivers, and healthcare professionals under the direction of physicians. They consist of a double-ended needle tube, connected to the needle hub with a connector, a needle container, a needle shield, and a sealing paper. The shield, container, and hub, along with the sealing paper, provide physical protection for the needle. The hub can be screwed onto a needle injection system (e.g., pen injector) for subcutaneous insulin injection. The product is primarily individually packaged and sterilized to a SAL of 10-6 by gamma sterilization. It is intended for single use only.
The hub has standard internal threads (needle assembly attachments), allowing it to be screwed onto the pen injector device. The patient and the cartridge end of the product are lubricated using a silicone-based medical lubricant to facilitate injection (to reduce pain) and penetration of the rubber septum.
A needle guard is mounted on the end of the needle to protect the tip from accidental damage. Each needle is protected by a peelable seal to provide a barrier against sterility. To use a pen needle, the user must remove the seal, attach it to the pen injector, and remove the needle container. The user must then remove the inner needle guard to expose the needle and perform an injection. After the injection, the user must insert the used pen needle into the needle container to remove the pen needle from the injector and dispose of it properly.

How to use
1) Remove the seal.
2) Align the needle with the pen injector.
3) Screw the needle firmly onto the pen injector. Keep the needle straight and free from damage.
4) Remove the needle container from the pen injector.
5) Remove the needle guard to expose the needle.
6) Inject according to your doctor's advice. Be sure to perform the injection safety test according to the injector's instructions for use.
7) Insert the used pen needle into the needle container.
8) Remove the pen needle from the pen injector and dispose of it properly.

Warnings
Before use, check the packaging for damage. For single use only; do not reuse. Use within the shelf life. Use with an ISO-compliant pen injector and only as directed by your doctor. Refer to the IFU for pen injectors. Keep the product and all components out of the reach of children.

Conservation
Store in a dry, well-ventilated place. Products should not be mixed with virulent, harmful, or corrosive materials.

Format
Pack of 100 pieces.